We have taken the same inner tubing of our Kevlar(R)) hose, and covered it with a high tensile grade 304 stainless steel. You still get all of the same flow rate and flexibility advantages of the Kevlar(R)) hose but with additional protection. The carbon lined inner tubing, for static dissipation, is smooth bore with large ID for maximum flow and convoluted exterior support for incredible flexibility. Ultra–flex stainless is 40 percent lighter and has an average of 14 percent larger ID than our premium stainless braided rubber hose. Being Teflon(R) it has a large range of applications including fuel, oil, water, methanol and air as well as a very high vacuum rating of 29Hg. The new stainless hose also accepts all of the same hose ends and crimp collars made for the Kevlar(R)) ultra–flex line. This means that the same crimper and dies used for the Kevlar(R)) hose can be used with the new stainless, so your ultra–flex crimper and dies are all you need for all of your high end line assemblies. Teflon(R) and Kevlar(R)) are registered trademarks of DuPont Performance Elastomers.

Specifications:

Color	Silver
Compatible Hose End	Ultra Flex
Description_ASC	Holley Performance Emission Code 5: This part is legal for sale or use on Emissions Controlled Vehicles; Uncontrolled (Non-Emissions Controlled) Vehicles; and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations
Description_DES	Ultra-Flex™ 304 Stainless Braid Hose
Description_EXT	Ultra-Flex™ 304 Stainless Braid Hose; Hose Size: -12AN; Hose I.D.: 0.780 in.; Hose O.D.: 0.961 in.; Max PSI: 880;MaxVacuum:29in. HG;BulkSoldByTheFtInContinuousLngth Up To 25 ft;
Description_FAB	Aircraft Quality 304 Stainless Steel Wire
Description_FAB	Clean and Fast Flowing
Description_FAB	Convoluted Outer Wall Of Inner Tube
Description_FAB	High-Temp. Smooth Bore PTFE Tubing
Description_FAB	Incredible Flexibility
Description_FAB	Remains Flexible At Temps. Between -94F And 510F
Description_FAB	Sold Per Foot
Description_INV	-12 ULTRA-FLEX S/S HOSE
Description_LAB	Proposition 65
Description_MKT	We have taken the same inner tubing of our Kevlar(R)) hose, and covered it with a high tensile grade 304 stainless steel. You still get all of the same flow rate and flexibility advantages of the Kevlar(R)) hose but with additional protection. The carbon lined inner tubing, for static dissipation, is smooth bore with large ID for maximum flow and convoluted exterior support for incredible flexibility. Ultra–flex stainless is 40 percent lighter and has an average of 14 percent larger ID than our premium stainless braided rubber hose. Being Teflon(R) it has a large range of applications including fuel, oil, water, methanol and air as well as a very high vacuum rating of 29Hg. The new stainless hose also accepts all of the same hose ends and crimp collars made for the Kevlar(R)) ultra–flex line. This means that the same crimper and dies used for the Kevlar(R)) hose can be used with the new stainless, so your ultra–flex crimper and dies are all you need for all of your high end line assemblies. Teflon(R) and Kevlar(R)) are registered trademarks of DuPont Performance Elastomers.
Description_SHO	Hose
Fluid Type	Automatic Transmission Fluid
Fluid Type	Bio-Fuels
Fluid Type	Coolant
Fluid Type	Diesel
Fluid Type	E85
Fluid Type	Methanol/Alcohol
Fluid Type	Oil
Fluid Type	Pump Gas
Fluid Type	Race Gas
height	8.5
Hose Length	Bulk
Hose Outer Material	Stainless Steel Braided
Hose Size	12AN
Inside Diameter	0.780 in.
length	1.5
LTL	N
Material	Braided Stainless Steel
Maximum Working PSI	880
Minimum Bend Radius	1.968 in.
Outside Diameter	0.961 in.
Product Length	N/A
Size	12AN
Submersible in Fuel	Yes
Vacuum	0-29 in. Hg
WARNING CA Proposition 65	Yes
WARNING CA Proposition 65 Message	WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
weight	0.07
width	4.75